UX1000 Manual

・Headphones (main unit)
・Quick Manual
・“Safety Instructions / Warranty Terms” booklet

A：ANC Button
B：Volume + Button
C：Power Button
D：Volume – Button
E：LED Indicator
F：USB Port

Please charge the headphones according to the recommended USB charging conditions below. While charging, the LED indicator will light up as shown in the diagram according to the remaining battery level of the headphones.

Battery Level	LED Indicator
0〜99%	Orange LED lights up
100%	LED turns off

※ The device will turn OFF while charging.
※ A charging cable is not included. Please use a commercially available USB cable.

【Recommended USB charging environment】
USB charger: A commercially available USB charger capable of supplying 1A or more
USB cable: USB Type-C cable (USB-compliant)

Press and hold the power button for about 3 seconds to hear the “POWER ON” guidance, and the device will turn on. The LED indicator will also light up in white for about 3 seconds.
If the battery level is low, a low-battery warning will play after the “POWER ON” guidance. In this case, please charge the device as soon as possible.

Press and hold the power button for about 3 seconds to hear the “POWER OFF” guidance, and the device will turn off. The LED indicator will also light up in white for about 3 seconds.
If the battery level is low, a low-battery warning will play before the “POWER OFF” guidance, and the LED indicator will flash orange for about 3 seconds. In this case, please charge the device as soon as possible.

When connecting your smartphone or other device for the first time, pairing is required. Once pairing is completed, the headphones will automatically connect to the device simply by turning on the power next time.

When using the headphones for the first time:
1.Press and hold the power button for about 3 seconds. After the “Power ON” voice guidance, you will hear “Bluetooth Pairing.” ※1 At this time, the LED indicator will flash white.
2.Turn on the Bluetooth function on your smartphone or other device. When “final_UX1000” appears in the list of available devices, select it. When the screen shows “final_UX1000 Connected” ※2 on the device, pairing is complete.

When re-pairing or pairing with a second device:
1. Turn off Bluetooth on the device already paired, or delete the pairing information.
2.Press and hold the power button for about 3 seconds. After “Power ON,” the “Bluetooth Pairing” guidance will be heard.
3.Turn on Bluetooth on the device you want to pair. Select “final_UX1000” when it appears. When the device screen displays “final_UX1000 Connected,” pairing is complete.

※１ If no connection is made within 5 minutes, the headphones will automatically power off.
※２Display wording may vary depending on the device.
※This product supports multipoint connection and can connect to up to two paired devices simultaneously. You can switch playback between devices or receive calls on the second device while listening to music on the first. If already connected to two devices, turning off Bluetooth on only one of them will NOT activate pairing mode. To pair a new device, turn off Bluetooth on both devices or disconnect both.

How to Reset the Headphones: If Bluetooth pairing does not work properly or the headphones do not operate as expected, you can reset the unit using the steps below. After the reset is completed, please try pairing again.

1.With the headphones powered on, press and hold both the Volume + and Volume – buttons simultaneously for about 10 seconds.
2.Release the buttons when you hear two beeps. ※
※ After this, you will hear the guidance “Bluetooth disconnected” followed by “Bluetooth Pairing.” This indicates that the reset is complete and the headphones have returned to factory settings. All pairing information stored in the headphones will be deleted. Please also delete the pairing information for this device from your smartphone or other connected devices, then perform pairing again.

Music	Play	Press the power button once
	Pause	Press the power button once
	Next Track	Press and hold the Volume + button for about 2 seconds
	Previous Track	Press and hold the Volume – button for about 2 seconds
Incoming Call	Answer Call	Press the power button once
	End Call	Press the power button once
	Reject Call	Press the power button twice
Music / Call (Common)	Increase Volume	Press the Volume + button once
	Decrease Volume	Press the Volume – button once
Noise Cancelling / Ambient Mode Switching		Press the ANC button once
Noise Control OFF		Press and hold the ANC button for about 2 seconds※

※ Pressing the ANC button once or pressing and holding it for about 2 seconds will return to the previously selected mode (Noise Cancelling/Ambient).

The noise control function offers the following two modes, which can be selected using the ANC button.
“Noise-Cancelling Mode”: Reduces surrounding noise to make the playback sound easier to hear.
“Ambient Mode”: Allows surrounding sounds to be heard along with the playback audio.

※The factory default setting is Noise-Cancelling Mode.
※Press and hold the ANC button for about 2 seconds to turn off the noise control function.

・Cause1：(Immediately after purchase) Battery level is low
For safety during international transport, the built-in battery cannot be fully charged at shipment due to IATA regulations. As a result, the battery level may be below the required operating voltage when the package is opened. Please fully charge the headphones before use. For charging instructions, refer to the section above titled “Charging the Headphones”.

・Cause2：Power button has not been pressed long enough
Press and hold the power button until the headphones turn ON. For details, refer to “Turning ON the Power”.

・Cause3：Charging
The device cannot be powered ON while charging. Please turn on the device when it is not being charged.

Cause：Output of the USB adapter being used is low
When using a USB port on a PC or similar device, the output may be insufficient, causing charging to take longer than expected. Please use a USB adapter capable of 5V / 1A or higher.

Cause：Power button has not been pressed long enough
Press and hold the power button until the headphones turn OFF. For details, refer to “Turning OFF the Power”.

・Cause1：Headphones are not in pairing mode
Performing a reset may resolve the issue. For details, refer to “Performing Factory Reset ”.

・Cause2：Automatically reconnecting to a previously paired device
This unit supports multipoint connections and can connect to up to two previously paired devices simultaneously. To pair a new device, please turn off the Bluetooth function on any currently connected device or disconnect it before starting the pairing process.

Cause：External interference affecting connection stability
Bluetooth communicates using the 2.4GHz band which might be interefered by other wireless standards such as Wi-Fi, etc. Moreover, the connection is sensitive against liquid where humidity, rain, or even the size of head could cause disruption to the connection. The specifications of the device to be connected could cause variation too. For that reason, reducing the distance between devices or switching OFF unused Wi-Fi/Bluetooth of surrounding devices may improve the connection.Bluetooth communicates using the 2.4GHz band which might be interefered by other wireless standards such as Wi-Fi, etc. Moreover, the connection is sensitive against liquid where humidity, rain, or even the size of head could cause disruption to the connection. The specifications of the device to be connected could cause variation too. For that reason, reducing the distance between devices or switching OFF unused Wi-Fi/Bluetooth of surrounding devices may improve the connection.

If dirt such as skin oils accumulates on the headband or earpads, gently wipe it off with a soft, dry cloth.

The rechargeable batteries built into the equipment are recyclable. During disposal, please follow the instructions from your local municipal government and do not attempt to disassemble the product.

The warranty for this product is valid for 1 year from the date of purchase. During the warranty period, we will repair the product based on the provisions below. The warranty is only valid in the country in which the product was purchased. Regarding questions pertaining to repairs, please contact the store you purchased the product from or contact us by visiting our “Contact” page.

1. If the product malfunctions within the warranty period under the usage conditions specified in the warnings and cautions of this manual, we will repair it free of charge.
2. In the following cases, repairs to the product will be subject to a fee even during the warranty period:
(1) Original purchase receipt or other documentation showing the date of purchase are failed to be presented.
(2) The product is identified to be modified, disassembled, or repaired by a third party or customer other than our company or our authorized organizations.
(3) The earphones were subjected to a strong impact or were allowed to get wet. Product failure resulting from an excessive use of force on the product.
(4) Failure due to fire, earthquake, wind, flood, lightning, or other acts of God, human error, theft, or virus and malware infection.
(5) Repair of scratches on the surface of the housing or repair of the housing itself.
3. We shall not be liable for any incidental or consequential damages for breach of any express or implied warranty or condition on this product. Nor shall recovery of any kind against us be greater than the original purchase price of the product from us or an our authorized dealer.

Please contact us by visiting our official “CONTACT” page.