ZE2000

"ZE2000" is a model that has a different tuning based on ZE3000, a new classic product of a completely wireless earphone.

The model ZE3000, which became the base of the "ZE2000", does not dare to install noise canceling functions and external sound import functions because it specializes in "sound quality". Earphones are audio products and priority is sound quality. " The product ZE3000, which is packed with this feeling, is not only a winning Win of the Winning Winning and Planning Awards at the largest audio -award VGP in Japan in 2021, but also in the home appliance magazine, "Home Electric Criticism" that handles all home appliances. We have received high praise not only from audio enthusiasts, but also from a wide range of people.

"ZE2000" is a model that is based on ZE3000 but has a different sound quality. The ZE3000 is a natural and natural sound quality, and you can feel the fine sounds and sounds in the back of the song, whereas "ZE2000" is a little closer to the ears of the vocals and instruments compared to ZE3000. Masu.
One of the pleasures of audio is "comparing sounds." By comparing various models, you can discover the fun of music and the goodness of each product you have never noticed before.
Please enjoy the new product "ZE2000" full of our commitment and thoughts compared to ZE3000.

Equipped with a new design driver "F-Core for Wireless" that realizes ultra-low distortion

The distortion of excellent audio equipment and amplifiers, such as amplifiers, is extremely low, about 0.0001 %. On the other hand, the distortion generated in the driver unit (speaker part) inside the earphone is more than 1 % in low frequencies even in excellent products. In other words, it can be said that a distortion of more than 100,000 times is generated in the process of converting the electrical signal into a sound in the earphone driver unit (speaker part). If this distortion can be greatly reduced, the sound quality will be dramatically improved. In addition, complete wireless earphones often have a large sound quality adjustment that relys on the equalizer by software, which tends to have sound quality that is easy to hear. The ZE2000 is adjusted so that the basic performance of the driver unit is improved, and the acoustic sound quality adjustment using the sound space inside the earphone housing is adjusted so that the sound quality is satisfactory without equalizer. In addition, we perform extremely effective corrections that can only be done by equalizers, such as lowering the sound pressure in the narrow band as a pinpoint. However, to make effective use of this equalizer adjustment, a driver unit with extremely high accuracy sound pressure frequency characteristics is required. If there is a 3DB variation of a general accuracy, correction with equalizers will result in an unnatural result.
These thorough decreasing measures have made it possible to clearly hear the details of each sound that was buried in other sounds and were hard to hear. Furthermore, listening to the process of attenuating reverberation to the end, you can feel the size of the music of the music.

"F-Link Dumping Mechanism" to optimize the internal pressure of the housing

Completely wireless earphones need to store batteries, electronic substrates, antennas, etc. at a high density in the housing. As a result, the degree of freedom to adjust the sound quality by acoustic means is low, and you have to make sounds in severe constraints. In addition, since completely wireless earphones require waterproof performance, a vent (ventilation hole) that optimizes the pressure of the acoustic space inside the earphone housing cannot be opened outside the housing. As a result, a general complete wireless earphone without a vent will have an excessive low frequency range and have to emphasize the high frequency range to balance. As a result, it tends to lose naturalness, such as making a flashy sound that emphasizes both the low and high frequencies, but also the vocals are far away.

The ZE2000 optimizes the pressure of the acoustic space inside the earphone housing, and has developed and installed a new "F-Link Dumping Mechanism" that enables the same acoustic design as a wired earphone without vent outside the housing. I am. This allows you to properly control low -frequency controls that were difficult to achieve with the sound quality design of complete wireless earphones, and played vocals that tend to be far away in the intended balance. In addition to drum kicks and low -frequency playbacks such as bass lines, the quality of the driver unit is combined with the ultra -low distortion of the driver unit to achieve a high quality expression in the bass.

Compatible with high -quality and low -delay codec ™ adaptive

In addition to SBC and AAC codecs, it also supports AptX ™, which is hard to interrupt and sound quality. It supports a wide range of models of iPhone and Android, and is easy to pair. In addition, it supports 48kHz/24bit wireless transmission by Qualcomm® aptX ™ adaptive codec.

Feeling of mounting as if customized

The ZE2000 provides a better feeling of wearing based on the housing design, which is the best solution of the IEM established with the wired earphones so far. Whether or not the wearing feeling of the earphone is excellent is determined by how small the pressure is. At first glance, the method of retaining the silicon reconciliation, such as claiming an organic shape and selecting an organic shape, seems to be correct, but the ears are always applied, putting a burden on the ears without noticing, accumulating fatigue. I will do it. Compared to the shape that is organic and large on the ear, we aim for a feeling of mounting without a feeling of pressure. The ZE2000 housing will give you a stable wearing feeling by holding it with 3 points. One of the pink parts (ear pockets) in the figure below, one point of the green part (earpiece), and one blue (ears). Therefore, it complies with many ears. If there is no feeling of oppression in all the contact points, you can feel that the installation of the earphones is so comfortable, and it has an excellent feeling of wearing as if it were a customized earphone for yourself.

Elepiece that realizes the best mounting feeling

5 sizes include the popular earpiece "Type E Complete Wireless Specification", which is popular with outstanding wearing and sound insulation. Many of the general earpieces are strongly squeezed into the back of the ear holes, which caused pain and fatigue when worn for a long time. The new Type E Complete Wireless specification is a type that is attached to the software at the entrance of the ear hole, so there is almost no foreign body feeling. By minimizing the wearing feeling itself, the "best mounting feeling" is realized. In addition, the axial color of the next size is different (the earpiece bundled in the Matte Black is alternate between thin gray and dark gray, earpieces included with ASH GRAY are clear and white alternate), making it easier to determine the size. Masu. Included 5 sizes of SS/S/M/L/LL. You can choose according to your preference. In addition, since this earphone is often attached to the entrance of the ear hole, L size earpieces are attached by default.

Easy touch operation is possible

In correspondence with touch operation, you can operate music playback/stop, call/end story more easily. The touch point is on the front side of the front side of the earphone itself (the surface is not printed on the logo), and it is designed to not cause erroneous operations when installed.

Waterproofing of IPX4 for IPX4

Supports waterproof IPX4 that is safe even with sudden changes in weather. You can use it without stress on rainy days or sports.

Charging case with an ideal shape that emphasizes comfort

Not only is it a thin compact size, but it can be easily opened and closed with one hand, and when you hold it, we are particular about shapes that are easy to adapt to your hand, and repeated prototypes to achieve the optimal shape.

2 color variations

Two color variations of Matte Black and Ash Gray. The earphone body and the charging case are made of lightweight resin housing, and mats are applied, which are less likely to have fingerprints and slide.

Equipped with auto pairing function

Equipped with an "auto pairing function" that starts pairing just by opening the lid of the charging case. You can listen to music as soon as you attach it to your ears. In addition, if the body is stored in the charging case and the lid is closed, the power is automatically turned off, so it is safe without forgetting the power.

Equipped with one ear mode

Just return one earphone to the case and automatically switches to "one ear mode" without interruption. In the case of "one ear mode", it switches from stereo playback to monaural playback * 1, so there is no discomfort when enjoying music with one ear. For example, it is useful when you want to enjoy music without shutting out external sounds, such as listening to music with one ear while cooking. * 1: monaural playback is a method in which the left and right sounds are played from one speaker. Switching to monaural playback only supports SBC/AAC connection.

Can be purchased one ear

If you lose one ear during the warranty period, you can purchase one ear. For details, see "" ""About one ear purchasePlease check.