final

Make3

Name: Make3
Brand: final
SKU: 12107A-003-01
Price: 13800.0 JPY
Availability: InStock
Rating: 5.0 (5 reviews)

Propose a new earphone
Both high resolution and natural sound quality,
Clear and spread sound.

It is a model of one dynamic driver. We aim for a natural and expensive sound only because it has a full range configuration that covers all bands with one driver. It is a model that thoroughly pursued basic basic. Stainless steel matte black finish. There are 847 sounds that can be made.

What is the Make series?

The “Make Series” proposes a new earphone based on the experience at the earphone assembly experience session, a popular event that has mobilized a total of 5,000 people.

Make1 can make more than 77 ways, and Make2 and 3 can make more than 847 sounds. Finding your own sound in an infinite sound is a property of a lifetime thing in listening to music. A new excitement is drawn out from your favorite song again, which is a completely new music experience, and once you experience it, you will no longer be able to return.

Make3 tuning method

Stainless steel housing mat black finish

Powdered stainless steel was sintered after molding. Matt black finish.

1 Dynamic DU

It is a model of one dynamic driver.

MMCX OFC Black Cable

MMCX connector is adopted and compatible with resident. It is safe when disconnected. It can also be used as a wireless earphone by connecting to another Bluetooth cable.
Adopted soft and supple coating material. It also bends flexibly when using ear hooks, achieving good installation.

Input: 3.5mm, 3 poles
Output: MMCX, straight type

Number of sound quality selection

The sound quality selected number is 847.

Different axis colored earpieces that make it easier to make left and right discrimination

The MMCX connector is a high -precision owned product. The high -purity OFC silver coat cable that gives the sound field is a jointly developed product with Junko -sha, which is famous for developing and manufacturing a cable for the supercomputer "Kyoto", which pursues the transmission speed of the signal. The insulation coating is a material PFA fluorine polymer, which has a large know -how under the Junfron brand and has a large know -how, and is the lowest dielectric rate. PVC is adopted to increase flexibility in the bean coat. It realizes surprising flexibility, is extremely easy to use and does not cause touch noise. In addition, for the MMCX plug that is likely to break the line and the 3.5mm mini -plug part, the specification that usually passes in the bend test of about 5,000 times, the specification that can withstand more than 50,000 bend tests. * Jun Kohosha: Developed and manufacture special cables that require high technical capabilities, such as high -speed coaxial cables that boast the world's fastest transmission speed of 95 % of light speed, ocean space, medical fields, cables in power plants, etc. I am doing the Japanese Junko company. Junko's cable is often called by the brand name Junfron, and has been greatly trusted by engineers who need special use cables.

Ele -hook to eliminate cable touch noise

Conventional similar products were large in size, assuming that they would be attached to the ears of various sizes. As a result, we have a smaller size than conventional ear hooks, and without using metal or resin wires, as a result I found a shape that fits easily. It has realized the comfort of forgetting to hang it with a slim, no foreign body feeling. There is no problem with glasses. The unpleasant sound (cable touch noise) generated by the cable and the body touching the cable and the body is dramatically reduced.

aging

Aging is a phenomenon that changes the sound by continuing to use for a certain period of time. The driver unit that makes a sound makes a sound by vibrating a very thin film that is molded by heat. The cause is not clear, but it is thought that the stress and adhesive that have been added when the film is molded will be familiar while continuing to use, making it easier to move during a microscopic signal. This product is a small diameter, so it takes longer time to make it difficult to understand the change in aging. If you can use it normal for about 150 to 200 hours, the delicateness will increase and the sound quality will be the original design intention.
*Since the aging has not clearly identified the cause of the improvement of sound quality, there has been no specification about aging. The phenomenon has been confirmed for a long time, and we have decided to give a lot of questions about aging.

型番	Fi-Make03
筐体	Stainless steel / matte black finish
ドライバー	Dynamic type
コネクター	MMCX
ケーブル	Black cable
感度	98db
インピーダンス	15Ω
質量	34g
コード長	1.2m

Make first experience, sound quality beyond the common sense so far

Until now, I used other companies' monitor earphones, but when I was worried about the sound quality, I was recommended by a friend and went to the store and watched it.
I was surprised at the variations of sound quality and characteristics that exceed the common sense.
Earphones that can be customized for your own purpose, you can make a higher resolution sound than the 1DD earphone of the ready -made product.
In this era when 1DD+1BA is the mainstream, I think it is the highest quality earphone as much as it is.
I can respond to the changes in the music I hear, so I think that it is an earphone that can be used only by replacing the filter without the need to buy a new body.
It is recommended because even beginners can make their favorite sounds.

With a calm and luxury, it has a good feeling of mounting

I think it is cool with a calm and luxurious design.

I thought it would be pretty good if I could make my favorite sound.

However, disassembling the earphone body will be exposed, so I was a little worried that I had to work carefully.

First Make experience

The first experience of FINAL was A4000.
It was a different world from other companies' BA machines I had listened to. After that, I was interested in Make that I could listen to Make1 at Final Store and tune.
I can't judge whether it's good or bad, so I decided to try it from make3 first, so I got a used one.
Still purchased at first.
A little dull impression.
When I put my hands little by little, I got my favorite sound.
I'm addicted to tuning.
Then I was hooked on make2, Make4 prototype and make.
You can't make a sound beyond the material, but you can make your favorite sound to make use of the material.

The origin of the Make series for me

A simple configuration called single dynamic.
That's why it's easy to play with, and it's a fun model.
The biggest attraction of Make3 is that you can enjoy the real pleasure of tuning as much as you want because it is a relatively easy -to -get price range.
I also purchased this model, and from there I arrived with make1 and make2.
If you couldn't meet Make3, you might not have been concerned about the series, as well as the FINAL brand manufacturer.
It is a model that is so deep.
MAKE4 has been released as an introductory for introductory, but it may be 3 stronger in that MMCX cable is adopted.

1DD is hot!

It's a single driver, isn't it the cheapest? That's not the case! This Make3 has a considerable potential!

First of all, it is pretty good even in the box. However, it is a Make series, so it is only for tuning.

Is it troublesome to tune? fine. Let's refer to other recipes. My recommendation is the recipe of the store clerk Natalie (I use a filter that is difficult to obtain, but maybe Natalie can divide it ...?)
Natalie's recipe will listen to vocals and musical instruments comfortably. Earphones do not leave your ears!

Also, if you go to Make's community, Maker's, you will find a fascinating recipe for Make users.
It is good to create your own recipe or reproduce other recipes. If you experience a changing sound, you will be addicted!

お支払い・配送について