D8000 Pro Edition

In response to the request from a recording professional who wants to listen to a loud volume higher than a general consumer, the "AFDS: Air Film Dumping System" has been tuned exclusively for professionals. Considering the hearing characteristics of human beings, as the amount of listening sounds increases, the low range becomes easier to hear. As a result, the D8000 Pro Edition has a higher sense of resolution when listening to "Pops" and "Lock" with narrow dynamic range, compared to the D8000, which was good at listening to "classical music" with a wide dynamic range. The sound quality is now felt.

Both the delicate high range of the plane magnetic field type and the dynamic type of dynamic type and the bass with a sense of openness

"Low range with a sense of openness and quantity"
The conventional plane magnetic field type must increase the frequency of the driver unit that can be played by the driver unit because the diaphragm contacts the magnet in a low frequency range where the amplitude is large. In order to make up for the bass that is insufficient as it is, the inside of the ear pad is sealed and the front of the diaphragm is closed. This is the same principle that the earphone that is sealed with the earpieces can be played to the low range despite the small size. By sealing the inside of the ear pad, the bass can be played to a low frequency band, but it will be played in a closed space similar to the earphones. In the D8000, the "AFDS: Air Film Dumping System" solves the problem in which the diaphragm contacts the magnet, so that the driver unit can reduce the frequency of the renewable bass. Along with the breathable ear pad, it enables the reproduction of bass with a sense of quantity and openness that could only be expressed in an excellent dynamic type.

"Delicate high range"
In order to play a delicate high range, the light weight of the diaphragm is given priority. The D8000 Pro Edition has a lighter vibration weight of about 1/3 compared to the same diameter dynamic type. Since the ultra -light film diaphragm is etched on a very thin aluminum foil coil, there is no need to use an adhesive that has an adverse effect on the dynamic type and an adhesive that has a negative effect on the sound quality. The D8000 Pro Edition has fundamentally solved problems caused by adhesives and realized delicate high -frequency playback.

"Both the delicate high range of a plane magnetic field type and the dynamic quantity of the dynamic type and the bass with a sense of openness"
Due to the delicate high -frequencies of the plane magnetic field type, the dynamic quantity of the dynamic type and the bass with a sense of openness, using the D8000 Pro Edition has new discoveries from familiar music, and you will want to reconsider your favorite music one after another. Masu. It is a product that can realize that the excellent sound quality can trigger a deeper music.

New development "AFDS: Air film Dumping System"

The conventional plane magnetic field -type driver unit had a problem in which the diaphragm contacts the magnet in a low range with a large amplitude. In order to solve this, we repeated the simulation of the diaphragm by the finite element method and the measurement with the laser doppler vibration gauge, establishing a new dynamic plate braking technology called "AFDS: Air film Dumping System". This has solved the problem that the reproducibility of the bass, which was a weak point of a plane magnetic field type, was low. It is a technique that can be said to be a reconstruction of a plane magnetic field type. In the D8000, AFDS solves the problem in which the diaphragm contacts the magnet, so that the driver unit can reduce the frequency of the renewable bass. Along with the breathable ear pad, it enables the reproduction of bass with a sense of quantity and openness that could only be expressed in an excellent dynamic type.

Design to make repair easier in consideration of long -term use

After the purchase, in order to use it for a long time, almost all parts were designed to be disassembled with screws. It enables repair and future upgrades.

Aluminum, magnesium alloy cutting housing

To establish AFDS, it requires extremely high accuracy than a general driver unit. Therefore, the cutting housing made of aluminum magnesium alloy is cut at high accuracy. Black is a leather paint finish that is also used for luxury cameras. The silver is hard -aluminum processing.

In -house factory production in pursuit of accuracy

The D8000 is produced in the headquarters in Kawasaki. The accuracy of the product assembly is greatly affected by the accuracy of the tool, which is a tool that assists assembly, along with the accuracy of the parts. The design and manufacture of production jigs are made in -house so that a small amount of sparse of parts accuracy can be fine -tuned while assembling. In addition, we have developed dedicated products such as production equipment such as vibration plate molding machines and vibration plate tension meters for the D8000. To create a really good thing, you need to step into the process of manufacturing parts close to the material. The goodness of MADE IN JAPAN is that the cooperation of a manufacturer close to the material is obtained. The high quality of the product is achieved by consistently controlling from the headwaters of parts to the product to the assembly of products.

Newly developed and detachable cable

Newly developed cable for D8000. OFC cable 3.5mm/1.5m/6.3mm/3m is included.
OFC cable (3.5mm)
Cable length: 1.5m
Input: 3.5mm, 3 poles
Output: 3.5mm, 2 poles (with rocking mechanism)
Compatible models: D8000/D8000 Pro Edition, Sonorous VIII/VI/IV/III/II

OFC cable (6.3mm)
Cable length: 3m
Input: 6.3mm, 3 poles
Output: 3.5mm, 2 poles (with rocking mechanism)
Compatible models: D8000/D8000 Pro Edition, Sonorous VIII/VI/IV/III/II