ZE3000

Equipped with a new design driver "F-Core for Wireless" that realizes ultra-low distortion

Completely wireless earphones are often adjusted to the equalizer with software, which can be said to be a side effect. As a result, the sound quality tends to be tired to listen to.
The ZE3000 enhances the basic performance of the driver unit, and adjusts the sound quality that can be sufficiently satisfactory without an equalizer by adjusting the acoustic sound quality using the sound space inside the earphone housing. On top of that, we perform extremely effective corrections that can only be done by equalizers, such as lowering the sound pressure of the narrow band as a pinpoint.
However, to make effective use of this equalizer adjustment, a driver unit with extremely high accuracy sound pressure frequency characteristics is required. If there is a 3DB variation of a general accuracy, correction with equalizers will result in an unnatural result. In order to solve this problem, we have developed a newly designed "F-Core for Wireless", which has newly reviewed the manufacturing method from zero, to achieve ultra-low distortion. Generally, the earphone diaphragm is made of a resin film integrated with the edge. Since a amplitude is required before and after, grooving is applied to the tangent direction to the dynamic board called a tangential edge, but in the case of a small -caliber driver unit that requires large amplitude, the amplitude of the vibration plate is rotated. The movement was added, causing the distortion.

"F-Core for Wireless" uses a special resin that combines lightness and hardness on the diaphragm. The edge around the diaphragm is made of extremely flexible special silicon to achieve a amplitude of a smooth and less distortion diaphragm. By separating the edge and the diaphragm, the diameter of 6 mm, but the driver unit 9mm or equivalent of a driver unit that uses a tangible edge is realized, and the amplitude amount is reduced. This is also contributing to reducing distortion. In addition, since this special silicon edge and diaphragm are directly pressed without the use of adhesive, it contributes to improving assembly accuracy and significantly reducing weight, that is, reduced distortion.

From these thorough decreasing measures, it is now possible to clearly hear the fine parts of each sound, which were hard to hear in other sounds. Furthermore, listening to the process of attenuating reverberation to the end, you can feel the size of the music of the music.

"F-Link Dumping Mechanism" to optimize the internal pressure of the housing

Completely wireless earphones need to store batteries, electronic substrates, antennas, etc. at a high density in the housing. As a result, the degree of freedom to adjust the sound quality by acoustic means is low, and you have to make sounds in severe constraints. In addition, since completely wireless earphones require waterproof performance, a vent (ventilation hole) that optimizes the pressure of the acoustic space inside the earphone housing cannot be opened outside the housing. As a result, a general complete wireless earphone without a vent will have an excessive low frequency range and have to emphasize the high frequency range to balance. As a result, it tends to lose naturalness, such as making a flashy sound that emphasizes both the low and high frequencies, but also the vocals are far away.

The ZE3000 optimizes the pressure of the acoustic space inside the earphone housing, and has developed and installed a new "F-Link Dumping" mechanism that enables the same acoustic design as a wired earphone without vent outside the housing. I am. This allows you to properly control low -frequency controls that were difficult to achieve with the sound quality design of complete wireless earphones, and played vocals that tend to be far away in the intended balance. In addition to drum kicks and low -frequency playbacks such as bass lines, the quality of the driver unit is combined with the ultra -low distortion of the driver unit to achieve a high quality expression in the bass.

Compatible with high -quality and low -delay codec ™ adaptive

In addition to SBC and AAC codecs, it also supports AptX ™, which is hard to interrupt and sound quality. It supports a wide range of models of iPhone and Android, and is easy to pair. In addition, it supports 48kHz/24bit wireless transmission by Qualcomm® aptX ™ adaptive codec.

Feeling of mounting as if customized

The ZE3000 provides a better feeling of wearing based on the housing design, which is the best solution of the IEM established with the wired earphones so far. Whether or not the wearing feeling of the earphone is excellent is determined by how small the pressure is. At first glance, the method of retaining the silicon reconciliation, such as claiming an organic shape and choosing an organic shape, looks correct, but always puts the power to the ears, puts a burden on the ears without notice, and accumulates fatigue. I will do it. Compared to the shape that is organic and large on the ear, we aim for a feeling of mounting without a feeling of pressure. The ZE3000 housing will give you a stable wearing feeling by holding it with 3 points. One of the pink parts (ear pockets) in the figure below, one point of the green part (earpiece), and one blue (ears). Therefore, it complies with many ears. If there is no feeling of oppression in all the contact points, you can feel that the installation of the earphones is so comfortable, and it has an excellent feeling of wearing as if it were a customized earphone for yourself.

Elepiece that realizes the best mounting feeling

5 sizes include the popular earpiece "Type E Complete Wireless Specification", which is popular with outstanding wearing and sound insulation. Many of the general earpieces are strongly squeezed into the back of the ear holes, which caused pain and fatigue when worn for a long time. The new Type E Complete Wireless specification is a type that is attached to the software at the entrance of the ear hole, so there is almost no foreign body feeling. By minimizing the wearing feeling itself, the "best mounting feeling" is realized. In addition, the axial color of the next size is different (the earpiece bundled in the Black is alternate between thin gray and dark gray, the earpieces bundled in WHITE are clear and white), making it easier to determine the size. Included 5 sizes of SS/S/M/L/LL. You can choose according to your preference. In addition, since this earphone is often attached to the entrance of the ear hole, L size earpieces are attached by default.

Easy touch operation is possible

In correspondence with touch operation, you can operate music playback/stop, call/end story more easily. The touch point is on the front side of the front side of the earphone itself (the surface is not printed on the logo), and it is designed to not cause erroneous operations when installed.

Waterproofing of IPX4 for IPX4

Supports waterproof IPX4 that is safe even with sudden changes in weather. You can use it without stress on rainy days or sports.

Charging case with an ideal shape that emphasizes comfort

Not only is it a thin compact size, but it can be easily opened and closed with one hand, and when you hold it, we are particular about shapes that are easy to adapt to your hand, and repeated prototypes to achieve the optimal shape.

2 color variations

Black and WHITE color variation. The earphone body and the charging case are lightweight resin housing, but have a glossy shiny paint finish reminiscent of a luxury camera warship. Normally, such a grain -painted paint is baked on the metal surface, but has been developed by developing a special processing that can be applied to the resin surface.

Equipped with auto pairing function

Equipped with an "auto pairing function" that starts pairing just by opening the lid of the charging case. You can listen to music as soon as you attach it to your ears. In addition, if the body is stored in the charging case and the lid is closed, the power is automatically turned off, so it is safe without forgetting the power.

"Equipped with one ear mode

Just return one earphone to the case and automatically switches to "one ear mode" without interruption. In the case of "one ear mode", it switches from stereo playback to monaural playback * 1, so there is no discomfort when enjoying music with one ear. For example, it is useful when you want to enjoy music without shutting out external sounds, such as listening to music with one ear while cooking.

* 1: monaural playback is a method in which the left and right sounds are played from one speaker. Switching to monaural playback only supports SBC/AAC connection.

One ear can be purchased when lost

If you lose one ear during the warranty period, you can purchase one ear. For details, see "" ""About one ear purchasePlease check.