B1

Based on the "relationship between the music of music and the physical characteristics of the dynamic range and the earphone headphones," we designed the sound quality. While studying the relationship between the "sound field feeling" and "resolution" or the physical characteristics of the "dynamic range" in music recording, the target curve and driver design suitable for each. By doing so, it has been found that you can enjoy music more deeply. B1 is a model that particularly emphasizes the close sound and realism. In the music represented by Anison, recording is made that promotes the proximity of the sound. The recorded sound source is designed to play the balance of the sound exactly as the studio engineer imagined.

Sound quality design based on "Relationship between the sense of music of music and the physical characteristics of the dynamic range and the earphone headphones".

Focusing on "Relationship between the sense of music and the physical characteristics of the dynamic range and the physical characteristics of the earphones and headphones", we made sounds. We tried organizing the recorded music by setting two axes. One is a way of thinking about the distance of the sound. In classical and jazz, it is considered that recording that emphasizes "sound field", such as a sense of distance and sound, is being made. On the other hand, in the recent recording of rock, POPS, and recent anison, it is thought that the sense of distance is not so important, and the "resolution" that each instrument and vocals appears in front is more important. Masu. The other is the "dynamic range". In other words, the volume of the volume is the time change width. If the dynamic range is large, it will naturally be possible to express dynamic music using the time change of volume, but on the other hand, the dynamic range so that all instruments and vocals are always in front of you, rather than changing the dynamic range. Some music is preferred for recording that reduces the width of. The differences in these ideas are not the best, but the difference between music and what is required of music. Classic, especially the orchestra, is particularly important to the front and rear relationships in the depth direction of the instrument, and there is a stringed instrument in front of it, and the sense of distance and volume of each musical instrument, which is located with wind instruments, percussion instruments, is lost. The music will go bankrupt. Therefore, there is no need for a uniform resolution that approaches all instruments in front of the eyes. In classical music, for example, in string quartet, the dynamic range is narrowed, and the resolution of each instrument is more prominent. On the other hand, rock and POPS do not require as much classic sound field, and emphasize resolution rather than sound field. These prerequisites are particularly important in listening of earphones and headphones, and it has been found that if you use a target curve or driver design suitable for each, you will be able to enjoy music more. Please refer to the following graph using the sound field feeling and resolution in this music as a horizontal axis and the dynamic range as a vertical axis. The E3000 of our product is designed just for the center of the graph, while the B series is located outside. In other words, the B series is a model that is more compatible with the listening of music than the E -series, and a product with such an attractive product that you can not let go if you are addicted to deeply. B1 is a model that particularly emphasizes the close sound and realism. The music represented by Anison has recorded a more prominent sound. The recorded sound source is designed so that the balance of the sound as imagined by the studio engineer can be played.

Repairable structure for long -term use

The body can be disassembled using a special tool. It is easy to repair, and it is designed to be used for a long time.

Feeling of mounting as if customized

Whether or not the earphone feels good is determined by the pressure. The shape that the organic surface is called an organic curved surface, and the shape that somewhere should be contacted somewhere can be maintained by compression, and the fatigue accumulates over time. We returned to the basics of wearing with little pressure and reconsidered, and we came to the idea that we hold it in two places and support one place to the extent that it does not shift. Like a tripod, stable installation can be obtained by holding any housing in three places. A total of three places, one of the green parts (earpieces) in the figure below, one of the blue parts (ear pearl), and one of the pink parts (ears: the ears of the ears). Will be. It is hard to feel stressed even if you apply force, which uses an earpiece and ears pearls, and adopts a method of attaching the earphones to support the pink pink part (ear shell part) to support the falling off. 。 The shape of the contact part is clearly suitable for more people's ears without feeling pressure. If there is no feeling of oppression in the installation, you will feel that the installation of the earphones is so comfortable, and you will get an excellent feeling of wearing as if it were a customized earphone.

Stainless steel housing by MIM (METAL INJECTION MOLDING)

MIM is a method of mixing metal powder and binder, molding with a mold like a resin, then sintering at a high temperature and adjusting the shape. Like the resin molded product, the freedom of the shape is high, and the internal design of the complex shape is possible.

BA type + dynamic driver unit

A total of two drivers are used, one for high notes, and one dynamic driver for bass for bass. We do not perform bandwidth by network.

MMCX connector + original high purity OFC silver coat cable

The MMCX connector is a high -precision owned product. The high -purity OFC silver coat cable that gives the sound field is a jointly developed product with Junko -sha, which is famous for developing and manufacturing a cable for the supercomputer "Kyoto", which pursues the transmission speed of the signal. The insulation coating is a material PFA fluorine polymer, which has a large know -how under the Junfron brand and has a large know -how, and is the lowest dielectric rate. PVC is adopted to increase flexibility in the bean coat. It realizes surprising flexibility, is extremely easy to use and does not cause touch noise. In addition, for the MMCX plug that is likely to break the line and the 3.5mm mini -plug part, the specification that usually passes in the bend test of about 5,000 times, the specification that can withstand more than 50,000 bend tests.